Tovar momentálne nie je na sklade. Môžete sa zaregistrovať nižšie a my vám pošleme upozornenie hneď, ako bude položka na sklade. Budete upozornení iba na túto položku.
Pošlite nám správu/dopyt na požadovaný tovar a my vás budeme kontaktovať.
Pošlite nám správu/dopyt na požadovaný tovar a my vás budeme kontaktovať.
Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!
Uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there's 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface.For example, you can use one as a power on/off button. See below for the link to get the optional tact switches, they're not included.
This version comes as a mini-kit, with a 2x13 extra-tall female header (to connect the plate to the Pi) and a 2x13 male header that can be used to connect an IDC cable or cobbler from the side.
The tactile buttons are not included, but you can pick up a pack of 20 here.
Some basic soldering is required to install the headers. You can also pick up an extra-long Pi stacking header if you want to install that instead of the 2x13 female header installed.