Tovar momentálne nie je na sklade. Môžete sa zaregistrovať nižšie a my vám pošleme upozornenie hneď, ako bude položka na sklade. Budete upozornení iba na túto položku.
Pošlite nám správu/dopyt na požadovaný tovar a my vás budeme kontaktovať.
Pošlite nám správu/dopyt na požadovaný tovar a my vás budeme kontaktovať.
Overview
Arducam PTZ camera is a complete solution to turn your Raspberry Pi/Jetson Nano/Xavier NX, and it is capable of remote directional and zoom control, so it could move the camera and the lens, and that means a single camera can be used to monitor places that should be covered by multiple ones. You can save a lot of cost and time in purchasing and deploying the camera. What’s more, this kit is based on the IR-CUT switchable 13MP camera to get sharp imaging all day and night.
Applications:
Specifications:
Image Sensor | Sony IMX477 |
Optical Size | 1/4” |
Pixel Size | 1.55um x 1.55um |
Active Pixels | 12.3MP 4056(H)x3040(V) |
Frame Rates | 1080p30, 720p60 and 640 × 480p60/90 |
Frame Rates on Nvidia Jetson |
4032×3040@30fps, 3840×2160@30fps, 1920×1080@60fps (NVIDIA Orin NX/AGX NX): 4032x3040@60fps, 1920x1080@60fps |
Shutter Type | Rolling Shutter |
Focal Length | 4.38-10.71mm±5% |
F.NO | W:1.6-T:3.3±5% |
Focus Type | Front group: focus Back group: Zoom |
Field of View(FOV) | 96° – 33° (Horizontal) |
IR Sensitivity | Optional with additional Motorized IR-Cut filter |
Dimension | 36mm x 36mm |
Pan and Tilt Range | 0-180° |
Zoom Range (Wide => Tele) | 2317 steps 0.00396mm/step |
Focus Range(Near => Far) | 3009 steps 0.0047mm/step |
Package Including
Documentation: